EastShore Mining Devices

Posts

Showing posts with the label A2 Terminator

【Tutorial & Setting up】Scrypt Miner 35MH Asic Miner A2 Terminator 28nm Litecoin Miner for Scrypt Mining Excellent as Gridseed Only 350w

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { PSU NEEDED } P lease prepare a ATX PSU ( >= 350w and with 6pin x 2) Plz make sure your PSU is powerful enough; check out this PSU: http://www.aliexpress.com/store/product/BTC-miner-1050W-PSU-80PLUS-GOLD-1050w-Power-Supply-with-6pin-x-4/1035615_2044191767.html { Before Start } Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.100 ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) We pack the products very carefully, but cords on the miner might fall out during the delivery, so, if the miner cannot start normally,...

【Tutorial & Setting up】110MH Scrypt ASIC Miner 110MH A2 Terminator Litecoin Miner for Scrypt Mining 110MH Asic Scrypt Miner Excellent as Gridseed

{UPDATE} This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {Before Start} Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.xxx ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) {Check Your Network} Pressing the Windows key + the R key. So 'Windows + R'. This should give you a small window called 'run'. Enter ' cmd ' in the window, and hit the enter key. This should open a new window. Input command " ipconfig ", it will show the details of your network. Make sure the "Default Gateway" is "192.168.1.xx". If the default gateway is not "192.16...

【Tutorial & Setting up】Gridseed A2 Terminator 90MH Litecoin Miner 28nm Gridseed G-Box for Scrypt Mining 60MH Asic Scrypt Miner

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {MINING GUIDE } The setting is the same with the 30MH A2 terminator scrypt miner. Please refer to the instructions of the 30MH A2 terminator miner for setting up, check it out here: http://eastshoretrade.blogspot.com/2014/05/tutorial-setting-up30mh-gridseed-a2.html

【Tutorial & Setting up】30MH Gridseed A2 Terminator 30MH Litecoin Miner 28nm Gridseed G-Box for Scrypt Mining 30MH Asic Scrypt Miner

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { Before Start } Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.xx ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) {MINING GUIDE} Connect the miner to the router by internet cord. Check out the default IP of the miner. Abount the default IP of the miner, plz see the section {Default IP} below. Power on the miner. Open configuration page: Open IE --> input the default IP in the address bar. (eg. the default ip of the miner is “105”, then input “192.168.1.105”. plz make sure the IP of yo...