EastShore Mining Devices

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { PSU NEEDED } Please prepare a ATX PSU ( >= 300w and with 6pin x 1) Plz make sure your PSU is powerful enough;  Check out this PSU: http://www.aliexpress.com/store/product/BTC-miner-550W-12V45A-80PLUS-GOLD-Power-Supply/1035615_1634977122.html { Setting Up the PSU } S uppose you use a ATX Computer Power Supply as your mining PSU. You will need 1 jumper wire.  On the PSU’s 24pin motherboard power cable, you have to cross the “Green” line and the “Black” line. (The PSU has a computer inside and it communicates with the motherboard.  For this setup, there is no computer motherboard to connect to, so, we have to make the PSU think it’s connected to the motherboard and the PCI and PCI-Express ports are needing the +12 V power.

{UPDATE} This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {Before Start} Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.xxx ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) {Check Your Network} Pressing the Windows key + the R key. So 'Windows + R'. This should give you a small window called 'run'. Enter ' cmd ' in the window, and hit the enter key. This should open a new window. Input command " ipconfig ", it will show the details of your network. Make sure the "Default Gateway" is "192.168.1.xx". If the default gateway is not "192.16

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {MINING GUIDE } Download the driver here: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx   Install the driver. (For 32bit OS, please install x86 version; for 64bit OS, please install x64 version). Download the zeus mining software(It's a .zip file, click "file" -- > "download" to download it): https://drive.google.com/file/d/0B-_jcpU1s5dgUFRSUGI0QmxHZzg/edit?usp=sharing Connect the PSU and Power on it. (NOTE: make sure all the cables connected tightly.) Connect the miner to the USB port or your PC via the USB cable. If it shows up “setting up the driver”, please wait it to finish. pressing the windows key + the R key. So 'Windows + R'. This should give you a small window called 'run'.

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {MINING GUIDE } The using of the miner is the same as the 1TH Dragon miner, check here for the tutorial of the dragon miner:   http://eastshoretrade.blogspot.jp/2014/03/tutorial-setting-up-1ths-btc-miner-28nm.html