EastShore Mining Devices

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {Video Guide} Here is a video guide by EastShore for how to reset the miner.  {Rest Guide} The reset hole is beside the ethernet port (The hole in the red circle in the following picture). It might be blocked by the "QC PASSED" label. You'll need something sharp and pointy to push the reset button. Connect the miner, and the PSU. The miner connected should be like this: Power on the miner. Wait for about 1~3 minutes, until a red light shows up on the blade. (There will be a red light shows up on each blade of the miner ) And a closer look of the red light. Then, get something sharp and pointy to push the reset hole for some seconds, until a red light shows up beside ethernet port.   Then release the reset button. Then please the p...

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {GUIDE} This guide will help you to re-image the Beaglebone board (bb board for short). The little black board in the following picture is the bb board on the antminer S5: {Before Start} Please prepare a 8GB microSD card and a micorSD card reader (You can also use a SD card reader and a SD card adapter). Download a HDD Raw Copy tool here (recommend you download the file " HDD Raw Copy ver.1.10 setup   "): http://hddguru.com/software/HDD-Raw-Copy-Tool/ install the HDD Raw Copy tool. Download the image needed: For S5 : Download the image file needed here: https://drive.google.com/file/d/0B-_jcpU1s5dgcU1zT2ZMVFlyWFE/view?usp=sharing For C1 :  Download the image file here and unzip the ".7z" file you download using the ".img" inside t...

{UPDATE} This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! {Miner Specifics} Brand: Antminer S5 Hash rate: 1150 GH/s (1.15 TH/s) ± 5% Power consumption: 590w Chips: 28nm BM1384 PSU: NO PSU. NEED a PSU >= 750w with 6pin x 2 (12V DC >= 60A) ( Very Important : please make sure your PSU is powerful enough. The 12V DC of your PSU is the higher ampere the better.) {Official Manual}  You can also get the official manual here (For network setting, firmware upgrade etc., please check out the manual): https://drive.google.com/file/d/0B-_jcpU1s5dgYzlqMnFuOUdNdWc/view?usp=sharing {Before Start} Please prepare a ATX PSU ( >=750w and with 6pin x 2) Connect the miner to the router by internet cord. For the miner configuration, please use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just...