EastShore Mining Devices

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { PSU NEEDED } P lease prepare a ATX PSU ( >= 1050w and with 6pin x 4) Plz make sure your PSU is powerful enough;  check out this PSU: http://www.aliexpress.com/store/product/BTC-miner-1050W-PSU-80PLUS-GOLD-1050w-Power-Supply-with-6pin-x-4/1035615_2044191767.html { Setting Up the PSU } S uppose you use a ATX Computer Power Supply as your mining PSU. You will need 1 jumper wire.  On the PSU’s 24pin motherboard power cable, you have to cross the “Green” line and the “Black” line. (The PSU has a computer inside and it communicates with the motherboard.  For this setup, there is no computer motherboard to connect to, so, we have to make the PSU think it’s connected to the motherboard and the PCI and PCI-Express ports are needing the +12 V power.

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { PSU NEEDED } P lease prepare a ATX PSU ( >= 350w and with 6pin x 2) Plz make sure your PSU is powerful enough;  check out this PSU: http://www.aliexpress.com/store/product/BTC-miner-1050W-PSU-80PLUS-GOLD-1050w-Power-Supply-with-6pin-x-4/1035615_2044191767.html { Before Start } Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.100 ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) We pack the products very carefully, but cords on the miner might fall out during the delivery, so, if the miner cannot start normally,

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { MINING GUIDE } First, the official <Mining Handbook> is good enough(except for how to using the cubieboard for miner) for mining with this miner, check it here for the official handbook: https://github.com/rockminerinc/rockminerinc.github.io/blob/master/mining_handbook_en.md Second, the official mining control device sent with the miner is "Cubieboard" now (NOT the Raspberry Pi), so plz get a reference for the following section for how to mining with the Cubieboard. {Use Cubieboard} It's very easy to use the Cubieboard for mining. The following pictures showing how to connect the Cubieboard. Connect the Cubieboard. Connect the miner to the Cubieboard via the USB cable. Connect the other cables. Plz make sure all