【Tutorial & Setting up】30MH Gridseed A2 Terminator 30MH Litecoin Miner 28nm Gridseed G-Box for Scrypt Mining 30MH Asic Scrypt Miner
{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { Before Start } Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.xx ”, so, plz make sure the IP your router is "192.168.1.xx" too(eg. 192.168.1.1). For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration) {MINING GUIDE} Connect the miner to the router by internet cord. Check out the default IP of the miner. Abount the default IP of the miner, plz see the section {Default IP} below. Power on the miner. Open configuration page: Open IE --> input the default IP in the address bar. (eg. the default ip of the miner is “105”, then input “192.168.1.105”. plz make sure the IP of yo