EastShore Mining Devices

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) { Important Note } We pack all the miners very carefully, but cords inside the miner might fall out during the delivery. So, if the miner cannot start normally, please just open the case and check if all the cords inside the miner are properly connected. (see section {Trouble List} at the end of this tutorial for the cords need to connect tightly) Please pay attention to the heat dissipation. In our test, when the heat dissipation is great, the speed can upto 1.1~1.15TH/s, however, when the heat dissipation is bad, the speed may down to 700GH/s ... For how to make the miner more cooler, see section {Heat Dissipation} beblow. {Before Start} Connect the miner to the router by internet cord. The default IP of the miner is “ 192.168.1.xx ”, so, plz make sure

{ UPDATE } This blog had moved to our official site: WWW.EASTSHORE.XYZ Check our official site for the newest bitcoin miner, the most updated tutorial and amazing support! :-) {MINING GUIDE } Please download the software package needed first: Driver: https://drive.google.com/file/d/0B-_jcpU1s5dgdmtfX1FtUFk5Z0U/edit?usp=sharing Zadig: https://drive.google.com/file/d/0B-_jcpU1s5dgNDktV3FPVDE5VlE/edit?usp=sharing BTC mining software(modified cgminer): https://drive.google.com/file/d/0B-_jcpU1s5dgTnRjV0RocXE3VlU/edit?usp=sharing LTC mining software(modified cpuminer): https://drive.google.com/file/d/0B-_jcpU1s5dgSDFiZUZTemtjNnM/edit?usp=sharing Tutorial Start: Set up the driver (For 32bit OS, please install x86 version; for 64bit OS, please install x64 version). Insert the USB miners. If it shows up “setting up the driver”, please wait it to finish. Run the zadig Choose " Options--->List all drivers ", and then in